K-TEK-M315TP-FN-BL-FC-KC-ML

  • Parameter
  • Detail
  • PDF Download
Category
Ultra Thin Keyboard
Key Number
87 keys (including 2 mouse buttons)
Backlight
White
Interface
USB
Key Travel
1.50mm±0.10mm
Key Switch
Carbon contact + FPC carbon-on-gold key switch technology
Protection Level
IP67
Mounting Solution
Panel mount
Operating Temperature
-40℃~+75℃
Application
Vehicle, aerospace, naval, defense, maritime, Radar, console, portable rugged laptop, UAV ground station etc.

DESCRIPTION: 87 keys IP67 fully sealed and durable embedded ultra thin rugged military keyboard, with built-in ultra-thin Flexible Printed Circuit and semi-reinforced ultra-thin stainless steel back plate, with fully sealed waterproof reinforced wide temperature touchpad for fast and accurate cursor position, 12 function keys(F1, F2, ... F12) are on top line for easy operation, with combination numbers on letter keys for full keyboard functionality. The keyboard adopts silicone rubber front plate + PC keycaps and carbon contact + FPC carbon-on-gold key switch technology, with 1.50mm±0.10mm key travel with extremely good tactile feeling for fast and accurate data input without any noise, there will be no key value missing, no stuck key during the keyboard operation, with durable coating & anti-microbial keyboard surface withstand most chemicals and liquids under harsh environment. FN + Clean combination keys for easy cleaning without taking the keyboard away from PC to avoid mis-operation or mis-typing. Adjustable white backlight included, panel mount solution. Designed to meet MIL-STD-810F (wide temperature, shock, salt mist, vibration, fungus, humidity etc.), Which can also meet the critical military standards in these 10 aspects: reliability, safety, maintainability, testability, supportability, environmental adaptability, stability, compatibility, consistency, and continuity.   

Dimensions: 315.0mm x 108.0mm (Front Panel)



MECHANICAL DATA

Key

87 keys (including 2 mouse buttons)

Key technology

Carbon contact + FPC carbon-on-gold key switch technology

Key travel

1.50mm±0.10mm

Switch life

more than 5 million of operations

Actuation Force

1.2N±0.2N

N.W.


ELECTRICAL DATA

Supply Voltage

DC +5V±5%

Current Rating

≤30mA when backlight is off, ≤300mA with backlight on

EMC Standard

EN 55032:2015   EN 55035:2017

Lifespan

> 5 years

Interface

USB

OS

All Windows, Linux, Unix, Mac OSX, Vxworks, Android, (U-cos--To be confirmed).

ENVIRONMENTAL ADAPTABILITY

Operating temperature

-40℃ to + 75

Storage temperature

-50℃ to + 85

Humidity test

1. Test temperature: 30℃~60℃,

2. Test humidity: 95%RH,

3. Test period: 24h as a cycle, 10 cycles, total 240h

Atmospheric pressure

57kPa~106kPa

Vibration test

0~2000Hz, displacement 1mm, acceleration 70m/s²

Shock test

1. Pulse waveform: post-peak sawtooth wave

2. Peak acceleration: 40g   

3. Pulse duration: 11ms

4. Test period: X,Y, Z triaxial, 3 times impact to each axial front and back, a total of 18 times

Temperature shock test

1. Test temperature: -55℃~75℃

2. Test period: -55℃ for 2h, 75℃ for 2h, 3 cycles, a total of 12h

Fungus test

1. Test temperature: (30±1) ℃

2. Relative humidity: (95±5) %RH

3. Test strains: Aspergillus flavus, Aspergillus variegatus, Penicillium cordylus, mucocellus globularis, Aspergillus Niger

4. Test period: 28 days (672 hours)

Slat spray test

1. Place the sample into the Salt Spray Corrosion Test Chamber, temperature inside the   chamber is 35 ℃;

Spray the sample with a NaCl test solution with a concentration of 5 ± 1% and a PH value of 6.6 for 24h at a

pressure of 96kPa; Test duration is 24 h.

2. After 24h of spray, dry and store the sample for 24h in an environment with temperature of 23 ℃ and humidity of 50%;

3. Steps 1-2 as one cycle, test for 2 cycles, total 96 h.

4. After the test, exhaust the fog for 10 min, check the sample after cleaning it with flowing water under standard

atmospheric conditions.

Rain test

1. Test procedure: Procedure - rainfall and blowing rain

2. Test direction: keyboard surface

3. Wind velocity: no less than 18 m/s

4. Test duration: 3h

Dust test

1. Test procedure: Procedure - Dust Blowing

2. Dust content: 10.6g/±7g/

3. Firstly conduct dust blowing for 6h under 23°C, then adjust the temperature to 60°C and stabilize for 1h,

and then re-conduct dust blowing for 6h.

Transport package drop test

1. Test procedure: Transport Drop Test

2. Sample state: Weight≤45.4kg, Maximum Size<91.0cm;

3. Drop height: 122cm

4. Drop count: drop to each surface, edge and corner, 26 times of drop totally.

RELIABILITY

RoHS compliant, CE and FCC certified, meet MIL-STD-810F (wide temperature, shock, salt mist, vibration, fungus, humidity etc.)

Protection Level

IP67 (front panel)

Key Lifespan

>5 million actuations

MTBF

>20000H

MTTR

<30min

APPLICATION

Vehicle, aerospace, naval, defense, maritime, Radar, console, portable rugged laptop, UAV ground station etc.