K-TEK-V285-FN-BL-SC-FC-ML-DWP

  • Parameter
  • Detail
  • PDF Download
Category
DWP Scissors Switch Keyboard
Key Number
86 keys
Backlight
White
Interface
Matrix/USB/PS2
Key Travel
1.20mm±0.10mm
Key Switch
Rugged scissor switch technology
Protection Level
IP67(front panel)
Mounting Solution
Panel mount
Operating Temperature
-40ºC to +60ºC
Application
Vehicle, aerospace, naval, defense, maritime, Radar, console, portable rugged laptop, UAV ground station etc.

DESCRIPTION: 86 keys compact IP67 dynamic fully sealed waterproof and durable embedded ultra thin rugged patented scissor switch keyboard, with built-in ultra-thin Flexible Printed Circuit, 12 function keys (F1, F2, ... F12) are on top line for easy operation, and numeric keypad on right side. It adopts scissor switch technology with 1.20mm±0.10mm key travel with extremely good tactile feeling for fast and accurate data input without any noise, there will be no key value missing, no stuck key or repeat output during the keyboard operation, with durable coating & anti-microbial keyboard surface withstand most chemicals and liquids under harsh environment. FN + Clean combination keys for easy cleaning without taking the keyboard away from PC to avoid mis-operation or mis-typing. Adjustable white backlight included, panel mount solution. Designed to meet MIL-STD-810F (high and low wide temperature, low pressure, humidity, vibration, shock, temperature shock, rain, salt mist, dust, fungus, solar radiation etc.) as well as the critical military standards in these 10 aspects: reliability, safety, maintainability, testability, supportability, environmental adaptability, stability, compatibility, consistency, and continuity; MIL-STD-461G-EMC-EMI-EMS-ESD (optional). Patented keyboard (Patent number: 202422198937.6)

Dimensions: 285.0mm x 108.0mm (Maximum frame size)


MECHANICAL DATA

Key

86 keys

Key switch

Rugged scissor switch technology

Key travel

1.20mm±0.10mm

Key life span

more than 5 million of operations

Actuation Force

0.8N±0.2N

ELECTRICAL DATA

Supply Voltage

DC +5V±5%

Current Rating

≤30mA when backlight is off, ≤300mA with backlight on

EMC Standard

EN 55032:2015   EN 55035:2017

Lifespan

> 5 years

Interface

Dot matrix, USB, PS2 optional

OS

All Windows, Linux, Unix, Mac OSX, Vxworks, Android

ENVIRONMENTAL ADAPTABILITY

Operating temperature

-40℃ to + 60

Storage temperature

-50℃ to + 70

Humidity test

1. Test temperature: 30℃~60℃,

2. Test humidity: 95%RH,

3. Test period: 24h as a cycle, 10 cycles, total 240h

Atmospheric pressure

57kPa~106kPa

Vibration test

0~5.1Hz, displacement 1mm

Shock test

1. Pulse waveform: post-peak sawtooth wave

2. Peak acceleration: 40g   

3. Pulse duration: 11ms

4. Test period: X,Y, Z triaxial, 3 times impact to each axial front and back, a total of 18 times

Temperature shock test

1. Test temperature: -50℃~70

2. Test period: -50℃ for 2h, 70℃ for 2h, 3 cycles, a total of 12h

Fungus test

1. Test temperature: (30±1) ℃

2. Relative humidity: (95±5) %RH

3. Test strains: Aspergillus flavus, Aspergillus variegatus, Penicillium cordylus, mucocellus globularis, Aspergillus Niger

4. Test period: 28 days (672 hours)

Salt spray test

1. Place the sample into the Salt Spray Corrosion Test Chamber, temperature inside the   chamber is 35 ℃; Spray the

sample with a NaCl test solution with a concentration of 5 ± 1% and a PH value of 6.6 for 24h at a pressure of 96kPa; Test duration is 24 h.

2. After 24h of spray, dry and store the sample for 24h in an environment with temperature of 23 ℃ and humidity of 50%;

3. Steps 1-2 as one cycle, test for 2 cycles, total 96 h.

4. After the test, exhaust the fog for 10 min, check the sample after cleaning it with flowing water under standard

atmospheric conditions.

Rain test

1. Test procedure: Procedure - rainfall and blowing rain

2. Test direction: keyboard surface

3. Wind velocity: no less than 18 m/s

4. Test duration: 3h

Dust test

1. Test procedure: Procedure - Dust Blowing

2. Dust content: 10.6g/±7g/

3. Firstly conduct dust blowing for 6h under 23°C, then adjust the temperature to 60°C and stabilize for 1h, and then

re-conduct dust blowing for 6h.

Transport package drop test

1. Test procedure: Transport Drop Test

2. Sample state: Weight≤45.4kg, Maximum Size<91.0cm;

3. Drop height: 122cm;

4. Drop count: drop to each surface, edge and corner, 26 times of drop totally.

RELIABILITY

RoHS compliant, CE and FCC certified, MIL-STD-810F (high and low wide temperature, low pressure, humidity, vibration (Transport packaging vibration, working vibration 5.1Hz), shock, temperature shock,

rain, salt mist, dust, fungus, solar radiation etc.).

Protection Level

IP67 (front panel)

Lifespan

>5 years

MTBF

>20000H

MTTR

<30min

APPLICATION

Vehicle, aerospace, naval, defense, maritime, Radar, console, portable rugged laptop, UAV ground station etc.